Our Hire Fleet

Ground Screw Machine Hire & Screw Pile Equipment

Need a ground screw machine for hire without purchasing specialist installation equipment for a one-off project?

ABC Anchors offers a UK hire fleet of handheld and excavator-mounted torque heads for installing screw piles and ground screws.

Whether you refer to them as ground screw installation machines, screw pile drivers or torque heads, the aim is the same: providing the controlled rotational torque needed to install helical foundation systems into the ground.

Equipment hire gives contractors the flexibility to choose machinery suited to a particular project without investing in equipment that may only be required occasionally.

Hire periods can range from approximately 2–3 days to 1–2 months depending on the product, and our equipment can be shipped throughout the UK.

If you are unsure which machine is suitable for your piles, excavator or site access, speak to us before arranging your hire.

Ground Screw and Screw Pile Machine Hire

​

The machinery used to install a ground screw or screw pile needs to match several factors, including:

​

• the pile diameter and specification

• required installation torque

• ground conditions

• available site access

• whether an excavator can reach each installation position

• the hydraulic capacity of the carrier machine and

• the installation angle required

For that reason, there is no single ground screw installation machine suitable for every project.

At ABC Anchors, we provide both handheld torque heads and excavator-mounted torque heads, allowing equipment to be selected around the actual installation requirements.

You can see the wider specifications on our screw pile installation equipment page.

​

Handheld Ground Screw Machine Hire

For projects where excavator access is difficult or impossible, a handheld torque head can provide a practical installation method.

​

ABC Anchors offers the 400H and 700H handheld torque heads.

Our through-drive machines are designed for screw pile installation in areas with very restricted access, including locations inside buildings.

A standard 30 l/min hydraulic power pack is used to power the driver, and the torque gauge is calibrated to provide installation torque readings in kNm.

​

400H Handheld Torque Head

The 400H is a hydraulic handheld pile installer capable of delivering up to 4 kNm of installation torque.

It is particularly useful where piles or ground screws need to be installed in locations that larger machinery cannot easily reach.

Typical situations can include:

​

• restricted rear gardens

• existing buildings

• extension projects

• underpinning works

• sites with narrow access

• smaller foundation projects and

• individual installation points inaccessible to an excavator

The unit incorporates forward and reverse controls and a telescopic torque reaction arm.

For contractors searching for ground screw tool hire for restricted-access work, the handheld system can remove the need to position an excavator directly over every pile location.

​

700H Handheld Torque Head

The 700H provides a higher-capacity handheld option and is suitable for 76R screw piles, as well as certain other compatible pile systems.

Adaptors can be changed between suitable pile types, allowing the machine to be configured for the installation requirement.

Where you are unsure whether the 400H or 700H is appropriate, provide us with the pile specification and project information and we can help determine the suitable equipment.

​

Excavator-Mounted Ground Screw Installation Machine Hire

For projects with suitable machine access, an excavator-mounted torque head provides a powerful and efficient method of screw pile or ground screw installation.

ABC Anchors currently lists three main excavator-mounted options.

​

500X/XG Torque Head

The 500X/XG is used with 60R screw piles.

​

A choice of mounting brackets allows the torque head to be fitted to excavators from approximately 1.5 to 6 tonnes, depending on the machine and project requirements.

The mounting arrangement also allows piles to be installed at a range of angles.

This can make the 500X/XG suitable for smaller excavators and projects where manoeuvrability is important.

​

1600X Torque Head

The 1600X is used for 76R screw piles.

It can be fitted to excavators in approximately the 4 to 7 tonne range, subject to the appropriate mounting arrangement and hydraulic compatibility.

This provides a step up in capacity for projects requiring larger screw piles and greater installation torque.

2500X/XG Torque Head

​

For larger pile installations, the 2500X/XG is used with 89R screw pile range.

Mounting bracket options allow it to be fitted to excavators from approximately 4 to 10 tonnes, again subject to machine compatibility and project requirements.

If you are looking for screw pile driver rental for a larger foundation project, speak to us about the pile specification and excavator you intend to use before booking the equipment.

​

Which Ground Screw Machine Do I Need?

Choosing a machine simply by excavator size is not enough.

The torque head also needs to be suitable for the screw pile being installed and the torque required to achieve the specified foundation capacity.

As a starting point:

​

Restricted access:
A handheld 400H or 700H may be appropriate where an excavator cannot reach the pile position.

60R screw piles:
The 500X/XG is the main excavator-mounted option listed for the 60R range.

76R screw piles:
The 1600X is designed for this pile range, while the 700H provides a handheld option for suitable applications.

89R screw piles:
The 2500X/XG is the excavator-mounted option listed for this larger pile range.

Ground conditions and project design still matter. The correct equipment should therefore be confirmed against the actual pile and installation requirements rather than selected purely on the basis of these examples.

If your project is still at the planning stage, our screw pile process guide explains the stages from ground investigation and engineering through to equipment hire and installation.

​

What Jobs Can Ground Screw Machine Hire Be Used For?

Ground screw and screw pile installation machinery can be hired for a wide range of foundation projects.

These can include:

​

• house extensions

• garden rooms

• modular buildings

• new-build foundations

• underpinning and foundation repairs

• temporary structures

• commercial projects

• structures in restricted-access locations and

• other engineered screw pile foundation installations

The correct pile and machinery specification will depend on the structural loads and ground conditions for the individual project.

​

For example, equipment needed for several small piles supporting a lightweight structure may differ considerably from the machinery required for deep structural piles on a larger development.

​

What Is Included With Ground Screw Machine Hire?

The exact hire package depends on the equipment, pile system, excavator and project requirements.

Before your hire is confirmed, we can establish what machinery and compatible equipment are required for the proposed installation.

​

For excavator-mounted equipment, it is particularly important to confirm the excavator model, size and hydraulic requirements in advance.

Different carrier machines can require different mounting arrangements or hydraulic connections. Our hire terms note that additional costs may arise where site conditions differ from the information supplied or an excavator requires specialist hydraulic fittings.

When requesting a quotation, provide as much information as possible about:

​

• the screw pile or ground screw being installed

• pile quantity

• pile size

• expected installation depth

• required torque or pile loading

• excavator make and model where applicable

• excavator hydraulic specifications

• site access restrictions

• delivery location and

• required hire dates

This allows our hire package to be matched more accurately to your project.

​

Can I Hire a Ground Screw Machine for a One-Off Job?

Yes.

​

One of the main reasons ABC Anchors operates an equipment hire fleet is to allow customers to install screw piles for a one-off project without purchasing the machinery.

It also allows contractors who regularly install foundations to hire a different torque head when a particular project requires equipment outside their normal fleet.

This can be useful if you:

​

• only install screw piles occasionally

• need a higher-capacity machine for one project

• require a handheld machine for restricted access

• need equipment for a short installation programme or

• want to use screw piles without investing in dedicated machinery

How Long Can I Hire a Ground Screw Machine For?

Hire periods vary according to the equipment and project.

Our normal hire periods can range from approximately 2–3 days through to 1–2 months depending on the product.

This means equipment can be hired for anything from a relatively short installation through to a longer project programme.

Tell us your expected installation dates when requesting a free quote so availability and the appropriate hire period can be confirmed.

UK Delivery and Collection

ABC Anchors can ship hire equipment throughout the UK.

Once your project requirements and hire dates have been agreed, the equipment can be prepared for delivery to your site.

Our installation process also allows for hired equipment to be collected after the screw pile installation has been completed.

Delivery arrangements, site access and unloading requirements should be confirmed when placing your order.

Providing accurate site information at the outset helps us ensure the correct equipment reaches your site when it is needed.

​

Do You Provide Training or Support With Machine Hire?

Yes, support is available.

At ABC Anchors, we provide Monday–Friday guidance through our in-house team for customers using hire equipment.

Our hire terms also require hire equipment to be operated by a qualified or competent user, with familiarisation sessions available on request.

If your team requires more extensive instruction, we also offer screw pile installation training.

​

It is worth discussing training or familiarisation before your hire begins rather than waiting until the machine has arrived on your site.

​

Need to Check the Ground Before Installation?

If your project is still at the investigation stage, we also offer a Test Pile Kit for hire.

Our Test Pile Kit is intended to help gather site-specific information before the final screw pile design is confirmed.

​

It can include a selection of piles, typically 60R or 76R, extension shafts and torque-monitoring installation equipment.

Our test installation can help establish ground behaviour and confirm torque-to-load relationships relevant to the proposed foundation design.

This is different from simply hiring a ground screw machine for an already-designed installation. It is primarily intended to support the testing and design process.

​

Ground Screw Hire or Screw Pile Equipment Purchase?

Hiring makes particular sense when the equipment is required for a specific or occasional project.

Purchasing may become more appropriate for contractors carrying out frequent screw pile installations and wanting permanent access to their own machinery.

​

ABC Anchors offers Autoguide Equipment's torque heads for both hire and purchase, allowing the choice to be based on the contractor's workload and long-term requirements.

​

If you are not sure which approach is appropriate, consider how frequently the equipment will be used, the range of pile sizes you install and whether future projects are likely to require different torque capacities.

Hire a Ground Screw Machine from ABC Anchors

​

Whether you call it ground screw machine hire, ground screw tool hire, screw pile driver rental or screw pile installation equipment hire, the important part is matching the right machine to the pile, ground conditions and installation method.

ABC Anchors provides:

​

• handheld 400H and 700H torque heads

• excavator-mounted 500X/XG equipment for 60R screw piles

• 1600X equipment for 76R screw piles

• 2500X/XG equipment for 89R screw piles

• short and longer-term hire periods depending on the equipment

• UK-wide delivery

• Monday–Friday guidance and

• familiarisation sessions on request

Already know your pile specification and required equipment?

Request a screw pile and installation equipment quotation.

If you are not sure which ground screw installation machine you need, use our online contact form and provide your pile specification, project requirements, site access information and excavator details so we can advise on a suitable option.

Frequently Asked Questions About Ground Screw Machine Hire

​

1. Can I hire a machine to install ground screws?

Yes. ABC Anchors hires specialist handheld and excavator-mounted torque heads used to install screw piles and ground screws. The appropriate machine depends on the pile specification, required installation torque, access and the carrier machine available.

2. Is a ground screw machine the same as a screw pile installation machine?

The terminology varies within the market. Ground screws and screw piles are both helical foundation systems installed by rotating them into the soil. Equipment may therefore be described as a ground screw machine, screw pile driver, torque head or screw pile installation machine, although the specific machine still needs to be compatible with the pile being installed.

3. What ground screw machines can I hire from ABC Anchors?

Our screw machines range includes the 400H and 700H handheld torque heads together with excavator-mounted 500X/XG, 1600X and 2500X/XG torque heads. Different models are intended for different screw pile sizes and excavator capacities.

4. Can I hire a handheld ground screw machine?

Yes. The 400H and 700H are handheld installation options. They are particularly useful where access is too restricted for an excavator, including certain projects inside existing buildings.

5. Can I hire an excavator-mounted screw pile driver?

​

Yes. We offer excavator-mounted torque heads including the 500X/XG, 1600X and 2500X/XG. The required model depends on the pile being installed and the excavator being used.

6. What size excavator do I need?

It depends on the torque head. The 500X can be fitted to excavators from approximately 1.5 to 6 tonnes, the 1600X from approximately 4 to 7 tonnes and the 2500X/XG from approximately 4 to 10 tonnes, subject to the correct mounting and hydraulic requirements.

7. What is the minimum ground screw machine hire period?

Our hire periods vary by product, ranging from approximately 2–3 days to 1–2 months. The applicable minimum period should therefore be confirmed for the particular equipment you need.

8. Can ground screw installation equipment be delivered?

Yes. We can ship hire fleet throughout the UK. Delivery requirements and site arrangements should be agreed when the hire is booked.

9. Does machine hire include training?

Hire equipment must be operated by a qualified or competent person. Familiarisation sessions are available on request, and we also offer separate training options where additional instruction is required.

10. Is support available while I have the machine?

​

Our Monday–Friday guidance is available through our in-house team for hire customers.

11. How do I know which torque head I need?

Provide us with your screw pile specification, required loading or torque, site access details and excavator information where applicable. Our team can then help identify equipment appropriate for your project.

12. Can I hire equipment for just one screw pile project?

Yes. We specifically offer hire fleet so customers can install screw piles on one-off projects without having to purchase specialist machinery.

13. Can I hire equipment to test the ground before ordering the final piles?

Yes. We offer a separate Test Pile Kit containing equipment for preliminary site testing. This can help provide installation torque and ground-condition information before the final foundation design and full installation proceed.